#2034 / Statistical Data From The PCB Industry

Just about all electronic equipment uses printed circuit boards or flexible circuits for wiring and packaging materials. Electronic companies design their products then place orders for PCBs. Supply chains order accordingly and business trends begin to unfold from the PCB industry. This sounds simple enough, but countries and regions collect manufacturing data differently, so you have to understand statistical industry data before making forecasts.
The Ministry of Economy and Industry (METI) in Japan provides monthly shipping data from manufacturers that include volume and revenue. This data is categorized into three buckets; rigid circuit boards, flexible circuits and module substrates. The METI collects shipping data from Japanese manufacturers monthly, but these manufacturers outsource to other countries and this data does not include outsourced production. It is difficult to determine the percent of business shifted to other countries, but most of us believe the number is about 60 percent.
The IPC in the U.S. provides monthly industry data collected from a book and bill ratio comparing shipping data within North American. The data compares revenue changes from the industry collected from manufacturers. This data is not absolute revenue, so the industry results can’t be compared to other regions.
The Taiwan Printed Circuit Association (TPCA) provides monthly shipping revenue from publicly traded companies listed on the Taipei Stock Exchange. There are forty companies categorized into two groups – rigid board or flexible circuits. The shipping data is provided within three weeks after the month ended and is reported quick enough to determine business trends from the global electronic industry. The data is a little convoluted because production for many manufacturers is from Mainland China, and revenue includes shipments from here.
The TPCA also provides quarterly shipping data from 22 publicly traded companies in China (many manufacturers are headquartered in other countries). There are two industry associations in China – The China Printed Circuit Association (CPCA) and The Hong Kong Printed Circuit Association (HKPCA). Data from some manufacturers could be counted twice, and there is a few thousand PCB manufacturers in China that is not report their volume.
ZVEI, the PCB industry association in Germany provides quarterly market data from the German region that includes Switzerland and Austria. Similar with data collected from the IPC, it is not absolute revenue so the industry results can’t be compared to other regions.
The Korea Printed Circuit Association (KPCA) provides an annual report from the industry, so trends are difficult to detect in a timely manner.
There is no uniform method of collecting data from our industry. Evaluating numerical market information is difficult for the global market. The World Electronics Circuits Council (WECC) publishes an annual market report, but the infrequency of its release makes it difficult to see emerging trends.
The good news is the global PCB industry is growing! Business continues to shift from the U.S. and Europe to the Far Eastern region and a uniformed method of reporting can provide a solid platform to make informed decisions.

Dominique K. Numakura, dnumakura@dknresearch.com
DKN Research, www.dknresearch.com

*To view the Newsletter archives, click on the following URL:

Headlines of the week
(Please contact dnumakura@dknreseach.com for further information and news.)

  1. JDL (Major display manufacturer in Japan) 12/9
    Has demonstrated a new touch panel switch. It works without actual touch. But it has a high resolution by capacitance sensors. JDL will start the production in 2021.
  2. AIST (Major R&D organization in Japan) 12/10
    Has co-developed a new hCFET (heterogeneous Complementary-Field Effect Transistor) assuming 2nm process with TSRI in Taiwan.
  3. Tohoku University (Japan) 12/10
    Has unveiled new tiny magnetic tunnel junction device with 2.3 nm diameter. It works at 150 degree C.
  4. SCREEN Semiconductor (Major equipment supplier in Japan) 12/11
    Has commercialized a new large scale wafer scrabbing machine “SS3300S”. the machine is capable to process 1000 wafers per hour.
  5. AGC (Major glass product supplier in Japan) 12/14
    Has developed a new glass “WAVETRAP” with shielding capability. A fine metallic mesh sandwiched between glass plates absorb RF wave effectively.
  6. Panasonic (Major electronics company in Japan) 12/15
    Has rolled out a new connector series “R35K” for high density flex circuits. Height: 0.6 mm, Width:1.3 mm. Panasonic expects major applications in wearable devices.
  7. NIMS (R&D organization in Japan) 12/15
    Has discovered a ne trans element base semiconductor without toxic element for near IR ray. The chemical composition is Ca3SiO.
  8. Xacty (Device manufacturer in Japan) 12/16
    Has unveiled a new wearable camera “CX-WE300” for business use. The camera has a reliable correction function against vibrations.
  9. JAE (Major device manufacturer in Japan) 12/16
    Has commercialized a series of small size antenna “AN01” with a high radiation efficiency for 2.4 GHz, 5GHz and 920MHz bands of IoT equipment and automobile modules.
  10. TDK (Major device supplier in Japan) 12/16
    Has developed a new chip type noise control filter, “MDF1005” for PoC (Power over Coaxial) of automobile applications. Size: 1.0 x 0.5mm.
  11. NIMS (R&D organization in Japan) 12/16
    Has developed a new heat resistant vibration device built by GaN base MEMS process 5G device and automobiles. It works at 326 degree C.

Recent Articles of DKN Research
Please find the full articles at the following web site.